Module Grade Calculator
Lay out a single module's assessments with the weights from your handbook to see your weighted mark so far, its degree-classification band, and the average you need on the components still to come.
One module, component by component
Build the module from its handbook components, see the mark so far, and solve what the rest must average.
Study level
This module's assessments
Add every component the module is marked on — coursework, lab reports, presentations, the exam — with the weight from your module handbook. Leave the mark blank for anything you haven't sat yet.
The overall mark you want for this module (%)
How this module is built
Each slice is one component, sized by its module weight. Green clears the 40% pass mark; amber sits below it; the accent slice is everything still to sit.
Why the weights matter
Each component counts for the share your module handbook gives it — a 50%-weighted exam moves your module mark twice as much as a 25%-weighted essay marked the same. The calculator takes the weighted mean of everything graded, then solves what the rest must average to land you on target.
Module mark so far
69.6%
Weighted across the 50% of the module that's been marked — a 2:1 on the UK scale.
Mark so far
69.6%
graded only
Weight graded
50%
of the module
Pass mark
40%
cleared so far
Your mark on the UK classification scale
Your mark: 69.6%
You're in a borderline zone: 0.4 marks below a First (1st). Many institutions apply discretionary uplift in this band — a single stronger component can tip it over.
Needed on the remaining 50%
50.4%
AchievableYou need 50.4 on the remaining 50 weight to reach your 60 target.
Best possible
84.8%
if you ace what remains
Guaranteed floor
34.8%
even scoring 0 on the rest
Passing the average is not the same as passing the module
A module mark is one number, but two different rules sit underneath it: the overall pass mark, and any per-component minimum. Clear the average and you can still fail the module if a sub-component rule bites.
The overall pass mark
Undergraduate modules almost always pass at 40%; taught postgraduate (master's) modules pass at 50%. The toggle at the top of the calculator switches the pass mark and the band set your mark is read against, so the verdict is right for your level — not a US letter grade bolted onto a UK module.
The per-component minimum
Many modules also set a minimum mark on a specific component— often the exam, or a practical that must be passed in its own right — regardless of the weighted average. A glittering 75% coursework can't rescue a 32% exam if the regulations require the exam to clear 40%. The calculator flags any graded component sitting below the pass mark.
Average passes, module passes
The weighted mean clears the pass mark and no component breaches a minimum — the clean case, and the one most students assume always holds.
Average passes, component fails
The mean is above the pass mark, but one component is below its own minimum. The module can still be referred — the average alone never tells you this.
Capped on reassessment
A failed module is usually resat with the recovered mark capped at the pass mark (40% UG / 50% PGT). A near miss now is worth far more than a capped resit later.
| Level | Pass mark | Bands the mark reads against |
|---|---|---|
| Undergraduate honours | 40% | First (70+) · 2:1 (60–69) · 2:2 (50–59) · Third (40–49) · Fail (<40). |
| Taught postgraduate | 50% | Distinction (70+) · Merit (60–69) · Pass (50–59) · Fail (<50). |
Boundaries are the near-universal UK convention; your institution applies its own borderline, rounding and condonement rules. Switch the level toggle to read your module against the right set.
Where to find your component weights
The maths is only as good as the weights you feed it. Every module publishes them — these are the places to look, in order of authority.
The module handbook
The definitive source. The assessment section lists every component and its exact weight (e.g. "Coursework 40%, Examination 60%"). Use these figures verbatim.
The assessment brief
Each piece of coursework usually restates its own weight at the top of the brief on your virtual learning environment. Cross-check it against the handbook.
The module catalogue / spec
The university-level module specification (often public) records the approved assessment pattern and weights — handy when a handbook is vague or out of date.
When the weights don't add to 100%
If your components don't total 100%, the mark so far is still a fair weighted mean of what's graded — but the target maths assumes the ungraded weight fills the gap to 100%. The weight-total flag beside the target field warns you the instant the figures don't reconcile, so a mistyped weight never silently skews the verdict.
Reading the needed-on-remaining verdict
Once part of the module is banked, the calculator solves what the rest must average. Here is exactly what each verdict means and what to do about it.
| Verdict | What it means | What to do |
|---|---|---|
| Achievable | The average you need across the unsat components sits between 0 and 100% — it is within reach. | Aim a few marks above the figure for a buffer, and weight your revision toward the heaviest unsat component. |
| Secured | Even scoring zero on everything left keeps the module at or above your target. | Confirm there is no per-component minimum still to clear, then protect the result — don't coast into a sub-component fail. |
| Out of reach | Even a perfect 100% on what remains can't lift the module to your target. | Reset the target to the best band the "best possible" stat shows, and ask whether a capped resit or condonement applies. |
The best-possible and guaranteed-floor stats bracket the full range the module can finish in, so the headline never hides bad news.
A single module, worked end to end
Worked example
Your module has two components: a coursework essay worth 40% of the module (you scored 72), and a final exam worth 60% (not yet sat). You want to finish the module on a First-band 70%. What do you need on the exam?
- 1The 72 on the coursework banks 72 × 0.40 = 28.8 points toward the 100-point module total.
- 2To finish on 70 overall you need 70 points in total, so 70 − 28.8 = 41.2 points must come from the exam.
- 3The exam carries 60 of the 100 points, so the mark you need is 41.2 ÷ 0.60 = 68.67%.
- 4Cross-check the ceiling: a perfect 100 on the exam gives 28.8 + 60 = 88.8% overall — comfortably above 70, so the target is achievable.
- 5Cross-check the floor: even 0 on the exam still banks the 28.8% coursework — above the 40% pass mark only if the exam clears any minimum, so check the regulations.
Score 68.67% or more on the exam and the module finishes at or above 70% — a First-band result. The calculator does this the instant you type, flags the verdict in red if the target needs more than 100%, and warns you if a banked component is sitting below the pass mark.
Module mark traps to avoid
Averaging marks instead of weighting them
A 70 on a 50%-weighted exam and a 50 on a 50%-weighted essay average to 60 — but if the exam is 70% of the module, the weighted mark is 64. Plain averaging ignores how much each component counts. Always enter the handbook weight.
Confusing component weight with module credits
The weights here are the shares of one module (the exam is 50% of THIS module). They are not the module's credit value toward your year or degree — that is a separate, whole-degree calculation. Keep the two apart.
Trusting the average past a sub-component minimum
Some modules cap or fail you if a specific component (often the exam) falls below a threshold, even when the weighted average passes. The average is necessary, not always sufficient — read the module regulations.
Reading a UG module against postgraduate bands
A 55% module is a 2:2 for an undergraduate but only a bare Pass for a master's. Set the study-level toggle so the pass mark and band labels match your programme — the same percentage means different things.
Treating the remaining weight as the remaining marks
If your exam is worth 60% of the module, the score you need is solved over that 60-point slot — not over "the marks left to 100" after your current percentage. Enter the component's module weight and let the solver do the rest.
Rounding part-way through
Round only the final mark. This tool computes at full precision and rounds once at display, so its answer can differ by 0.1 from one worked by hand with rounded intermediate steps.
Working the module to your target
Planning the module
- Front-load effort into the heaviest components — a few marks on a 50%-weighted exam beat the same effort on a 10%-weighted quiz.
- Enter each component the moment it is marked; the "needed on remaining" figure sharpens as more of the module is banked.
- Add a 3–5 mark buffer above the required mark — exams and submissions rarely land exactly on plan.
Reading the verdict
- If the floor already clears your target, the result shows "secured" — confirm there is no minimum mark on a component you still have to clear.
- If the target is "out of reach", lower it to the best band still achievable, shown by the best-possible stat, then check for resit or condonement rules.
- Watch the per-component tint on the breakdown bar — an amber slice is a component below the pass mark, the first thing to query if the module is close.
How it works
- 1
List the module's components
Add every assessment the module is marked on — coursework, lab reports, presentations, the exam — with the weight your module handbook gives each one. Leave the mark blank for anything you haven't sat yet.
- 2
Read your mark so far and its band
The headline shows the weighted mean of the components already graded, the share of the module that's been marked, and which UK classification band the mark falls in.
- 3
Set a target to see what's needed
Enter the module mark you're aiming for and the calculator solves the average you need across the ungraded weight — flagging when a target is already secured or out of reach.
Module Grade Calculator — questions
How is a module mark calculated?+
A module mark is the weighted average of its components: each assessment's mark is multiplied by the weight your handbook gives it, the products are added up, then divided by the total weight. So a 70 on a 50%-weighted exam contributes twice as much as a 70 on a 25%-weighted essay. The calculator takes the weighted mean of everything you've been marked on, then solves what the remaining components must average to reach your target.
What do the component weights mean — and where do I find them?+
The weights are the share each assessment carries within this one module — for example a 50% exam and two 25% courseworks. They're published in your module handbook, the unit specification, or the assessment brief on your virtual learning environment. Enter the official figures rather than estimates: an error on a heavily weighted component moves the whole module mark.
What does "needed on the remaining" tell me?+
It's the average mark you'd need across every component you haven't sat yet to finish the module on your target. If your exam is worth 50% of the module, the figure is solved over that 50-point slot — not over the marks left to 100 after your current percentage. The verdict reads "achievable" when it's between 0 and 100, "secured" when even scoring zero on the rest keeps you on target, and "out of reach" when a perfect finish still falls short.
How does my module mark map to a degree classification?+
A module mark sits in the same UK honours bands a final classification is built from: 70% and above is a First, 60–69% is a 2:1, 50–59% is a 2:2, 40–49% is a Third, and below 40% is a fail. The calculator labels your live mark with its band. Taught postgraduate modules usually band as Distinction (70+), Merit (60–69) and Pass (50–59) instead.
What if my component weights don't add up to 100%?+
The mark so far is still a fair weighted mean of whatever has been graded, but the target maths assumes the ungraded weight fills the gap to 100%. The weight-total flag warns you whenever the figures don't reconcile — if it shows over 100%, recheck your handbook, since a typo there distorts both the current mark and the required figure.
Does passing the average always mean passing the module?+
Not always. Some modules require a minimum mark on a specific component, usually the exam, regardless of the overall average, and most require an overall pass mark of 40% for undergraduate modules or 50% for taught postgraduate ones. Hitting the target average is necessary but not always sufficient — check the module regulations for any sub-component or pass-mark rules before relying on the headline number.
Why might this differ slightly from the mark I worked out by hand?+
The calculator computes at full precision and rounds only the final figure, so its answer can differ by about 0.1 from one you worked by hand with rounded intermediate steps. Rounding part-way through a weighted average compounds small errors; rounding once at the end is the accurate approach.
Related tools
Final Grade Calculator
Work out exactly what you need on your final to hit the grade you want — or your grade so far from every assessment and its weight.
Grade Calculator
Add up every point you've earned across all your marked work to see your true overall grade — and exactly what you need on what's left.
GPA Calculator
Work out your credit-weighted GPA from your module grades and credits, on the 4.0, 4.0 (+/−) or 4.3 scale, with letter or percentage entry.
Need to lift that grade?
Tutorioo's AI tutor breaks down the topics you're losing marks on and gets you exam-ready. Free to start.